The right hand side of the Display tab contains settings affecting a mixture of controls.
Scope Mode sets the length of time for the sample shown when the display mode is set to Scope. The scope signal maximum is limited by the
agc action, so it is not an accurate picture of an incoming signal dynamic range unless AGC is set to Fixd and the RF: control adjusted.
The Multimeter dropdown boxes set various times for the meter dynamics.
Show Decimal puts a decimal point in the dBm meter readout for the seriously obsessive and Use Rig Value uses the rig S meter value sent
via CAT for those rigs, principally Elecraft and Yaesu, that have this function.
