|
Bandstacks
|
Previous Top Next |
|
There is a three-deep bandstack on all bands except 60m and GEN, which have five-deep bandstacks. The choice to stackf modes and/or
filters on each frequency is selectable in the Options tab.
On opening and running NaP3, it will go to the frequency, mode and filter that the rig is set to. A click on the Band button will store the
frequency, mode and filter (if the Options for the latter two is selected). A further click will go to bandstack entry two, another click to
bandstack entry three, and the next click will return to the first bandstack saved from the rig.
These can be varied to suit the operator's favourite frequencies, modes and filters, with the Span always returning to the chosen width for the
mode.
|