Record opens a window that allows recording of the entire span for later playback and tune around. The controls are self evident apart from
the Add which allows files to be chosen for playback.
In Span Playback, the entire band will be visible and the vfo locked but the sub rx can be used to tune around the recording! Modes and
filters may be changed during playback.
Warning: recordings are made at the sample rate selected in Sound Card Setup and they can rapidly get very large, 100MB being needed for a
minute at 192kHz. An entire 24h CW contest would take about 144GB...
All files are saved to NaP3 Recordings in the My Documents folder. Recording the audio outputs of each sdr is in the next section.
